Before First Use - Electrolux GA60LIWE User Manual

Hide thumbs Also See for GA60LIWE:
Table of Contents

Advertisement

Available languages

Available languages

Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates
TimeSaver and vice versa.
How to activate XtraDry
Press
until the indicator

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as
with the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with XtraDry.
How to activate TimeSaver
Press
The display shows the updated
programme duration.
. It is
7.3 XtraHygiene
This option provides better hygiene
results by keeping the temperature at
70 °C for at least 10 minutes during the
is
last rinsing phase.
How to activate XtraHygiene
Press
The display shows the updated
programme duration.
is on.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
until the indicator
until the indicator
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
ENGLISH
43
is on.
is on.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Ga60liswGa60licn

Table of Contents