Ratings; Pcm Down Conversion - Yamaha DVX-S100 Owner's Manual

Ratings

DVD-V
Depending on software capability, you can prevent discs
or scenes with objectionable material from being played
according to your desired rating. You can select the level
and lock it by designating a password.
Level 8 All DVDs can be played.
Level 7 to 1 Level of restriction becomes severer as the
number gets smaller.
Level 0 All DVDs cannot be played.
CODE SET
SHIFT
HALL JAZZ
1 2
SETUP
SPORTS MONO MOVIE
5 6
PLAY MODE
/DTS SELECT
9 0
TOP MENU
LEVEL
PRESET
u, d, j, i
CH
ENTER
/ ENTER
PRESET
TEST
ON SCREEN
(U.S.A. model)
I Setting method (Level 8)
1
Press SETUP while pressing SHIFT.
The menu screen appears on the video monitor.
2
Press d to select "Ratings" and press
ENTER.
3
Enter 4-digit number with numeric buttons
and press ENTER.
Press CANCEL if you want to re-enter other number.
The screen that confirms your password appears. Do
not forget your password.
SETUP
Enter a 4-digit password,
SELECT
Password
ENTER RETURN
4
Press ENTER.
When you select a disc that exceeds the rating you
have set, a message appears on the video monitor.
In that case, follow the procedure that appears on the
screen. You can go back to the previous screen by
pressing ENTER.
VIDEO 1
CD
DVD AMP
ROCK ENTERTAINMENT
3 4
ANGLE MARKER Numeric buttons
MOVIE 1 MOVIE 2
7 8
REPEAT A–B
MATRIX 6.1 STEREO
CANCEL
> – 10
CANCEL
GROUP PAGE
MENU
SET MENU
MUTE
ABCDE
CH
B. BOOST
VOL
RETURN
Ratings
then press ENTER.
✱✱✱✱
I To change settings (Level 7 to 0)
When you select "Ratings" in the setup menu, the screen
where you enter a password is displayed.
1
Enter 4-digit number with numeric buttons
and press ENTER.
Unlock Player: unlocks the rating and returns to level
8.
Change Password: changes the password.
Change Level: changes the level of the rating.
Temporary Unlock: temporarily unlocks the level of
the rating. It will be kept unlocked until you switch
the input source, turn the power off, or open the disc
tray.
2
Press the cursor buttons (u, d) to select the
desired item and press ENTER.
I If you have forgotten your
password
Return the setting to the factory setting. See page 47.
Note
• Not only the password setting but also all the other settings will
turn back to the factory settings.

PCM down conversion

Decide whether to output high-quality digital signals
(sampling frequency of 88.2 kHz and 96 kHz) or not, in
accordance with the capability of the connected
component.
• If your A/V component is capable of handling high-rate
sampling frequency digital signals, select "No".
• If not, select "Yes" so that digital output signals are
converted to 48 kHz or 44.1 kHz.
Note
• If a disc is copyright protected or has a sampling frequency of
176.4 kHz or more, signals are automatically converted to
either 48 kHz or 44.1 kHz.
SETUP MENU
DVD-A
DVD-V
51