Yamaha Pro IV Series Operating Manual page 36

Yamaha digital piano operating manual
Table of Contents

Advertisement

CHAPTER 1: Getting Started
Notes on the limitation of the compatible
file format
• SMF format 0: For playback and recording.
• SMF format 1: For playback only.
• E-SEQ: For playback and overwrite recording.
• The name of the SMF file should have an extension as
".MID" or ".mid".
• The name of the E-SEQ file should have an extension
as ".FIL" or ".fil".
Notes on the files created on the Disklavier
PRO Series
The song file created on the Disklavier PRO Series
contains various data that enable high-accuracy in song
playback. However, those data can not produce any
expected results and, moreover, may control the keys
unnaturally when the song file is modified on the external
MIDI device such as sequencer, etc. The above
mentioned problem does not occur in the following cases:
• When the song file stored/loaded in the Disklavier PRO
Series is played back on the Disklavier PRO Series
through an external MIDI device without any
modification on that device.
• When the song file is output from the [MIDI OUT]
terminal or the [USB
Center and played back on another MIDI device. Any
modifications are available.
• When the following event is deleted from the song file.
A0 kk dd : Polyphonic Key Pressure
A1 kk dd : Polyphonic Key Pressure
B0 10 dd : Control Change (General Purpose)
B1 10 dd : Control Change (General Purpose)
B0 51 dd : Control Change (General Purpose)
B1 51 dd : Control Change (General Purpose)
21
] port on the front of the I/O

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents