Cleaning click-on attachments
Cleaning the trimmer attachment
Storage
Replacement
Replacing the shaving heads
2yrs
Caution: Never dry the trimmer attachment with a
towel or tissue, as this may damage the trimming
teeth.
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision
trimmer attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the
attachment air-dry completely.
For optimal performance, lubricate the teeth of the
attachment with a drop of sewing machine oil
every six months.
Put the protection cap on the shaver to protect it
from any dirt accumulation.
Note: We advise you to let the appliance dry
before you put the protection cap on the shaving
unit.
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads ( 'Ordering accessories').
46
English