Philips FC6120 User Manual page 10

English
10
 Hold the dirt tray over a dustbin. Then press the slide on the lower
handle downwards to open the dirt tray door and empty the dirt
tray (Fig. 12).
5 Place the dirt tray back into the sweeper base and push it down
into position. (Fig. 1)
The dirt tray door closes automatically when you put the dirt tray back
into the sweeper base ('click').
Cleaning the roller brush
1 Switch off the appliance before you clean the roller brush.
2 Remove the transparent front cover from the sweeper base. Grab
the bottom edge of the cover with both hands, pull it outwards (1)
and upwards (2) firmly until it is released from the slots (Fig. 14).
 Rotate the roller brush until the cutting groove faces you. Use a
pair of scissors to cut the hairs, threads etc that have collected
around the roller brush (Fig. 15).
 Remove fluff, hairs and other dirt from the roller brush.
Removing the roller brush
1 To remove the stick, press the button on the lower handle (1) and
pull the stick upwards (2) (Fig. 5).
2 Turn the sweeper base upside down, push the release slide in the
direction of the arrow (1) and remove the retainer (2) (Fig. 16).
 Slip the belt off the end of the roller brush (1) and lift the brush
out of the base (2) (Fig. 17).
 Remove fluff, hairs and other dirt from the roller brush and the
groove.
Reinserting the roller brush
1 Slip the belt over the ribbed end of the roller brush. Insert the
other end of the roller brush into the slot opposite the
belt (Fig. 18).