Silvercrest SFS 150 B3 Operating Instructions Manual page 54

♦ Place a bag opening on the sealing wire
in place and does not slip, place the end of the bag below the suction con-
nectors
the marking "Seal", which is marked on the appliance.
NOTICE
► The bag opening must lie smoothly on the sealing wire
sealing does not function properly.
♦ Close the appliance lid. When doing so, ensure that both corners engage.
If necessary, press the corners down lightly until the device lid is engaged
properly. If the device lid is not properly engaged, the sealing process can-
not be started!
♦ Press the sealing button
♦ Hold the sealing button
extinguishes.
SFS 150 B3
. For this you can lift them slightly. The bag needs to extend up to
with both hands. The indication lamp
pressed down until the indication lamp
. To ensure that the bag is fi xed
. Otherwise, the
illuminates.
GB
MT
51