Yamaha Clavinova CLP-100 Owner's Manual page 72

Connections
2 AUX IN [L/L+R][R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the Clavinova's
speakers. Refer to the diagram below and use audio cables to make the connec-
tions.
CAUTION
When the Clavinova's AUX IN jacks are connected to an external device, first turn on the power to
the external device, then to the Clavinova. Reverse this order when you turn the power off.
Phone plug
(standard)
Phone plug
(standard)
3 USB [TO DEVICE] terminal
This terminal allows connection to USB storage devices.
Refer to "Connection to a USB storage device" on page 73.
4 USB [TO HOST] terminal
This terminal allows direct connection to a personal computer. Refer to "Connect-
ing a Personal Computer" on page 75 for more information.
5 MIDI [IN] [OUT] [THRU] terminals
Use MIDI cables to connect external MIDI devices to these connectors.
Receives MIDI data.
MIDI [IN]:
MIDI [OUT]:
MIDI [THRU]:
About MIDI
MIDI (Musical Instrument Digital Interface) is a standard format for data transmission/
reception. It enables the transfer of performance data and commands between MIDI devices
and personal computers. Using MIDI, you can control a connected MIDI device from the
Clavinova, or control the Clavinova from a connected MIDI device or computer.
6 [LAN] terminal (CLP-370/340, CLP-S308/S306)
Connect to the internet (see page 46).
72
CLP-370/340/330, CLP-S308/S306 Owner's Manual
Clavinova
R L/L+R
AUX IN
AUX IN
Audio cable
AUX IN
Audio cable
Transmits MIDI data.
Transmits data received at the MIDI [IN] terminal as it is.
Phone plug
(standard)
AUX OUT
Tone Generator
Plug shape depends on
the device.
OUT PUT
EMR1
NOTE
The Clavinova's [MASTER VOL-
UME] slider setting affect the
input signal from the AUX IN
jacks, but the [BRILLIANCE],
[REVERB], and [EFFECT] set-
tings do not.
NOTE
If you connect the Clavinova to a
monaural device, use only the
AUX IN [L/L+R] jack.
NOTE
There are two different types of
USB terminals on the instrument:
USB [TO DEVICE] and USB [TO
HOST]. Take care not to confuse
the two terminals and the corre-
sponding cable connectors. Be
careful to connect the proper plug
in the proper direction.
NOTE
MIDI performance data and com-
mands are transferred in the form
of numeric values.
NOTE
Since MIDI data that can be
transmitted or received varies
depending on the type of MIDI
device, check the "MIDI Imple-
mentation Chart" to find out what
MIDI data and commands your
devices can transmit or receive.
Refer to the MIDI Implementation
Chart in the Data Format on the
website.
For information on how to access
and obtain the Data Format list,
see page 3.
Direct URL:
http://www.yamaha.co.jp/manual/