Storing an FTS Program
1
Load a disc and stop playback.
2
Use 4 to go to the list of available tracks.
3
Use 2 or 1 to select tracks from the list.
To go directly to any track, enter the track number using
the numeric buttons (0-9).
4
Store each track by pressing ENTER/OK.
➜ The track numbers will be added to the list.
➜ The number of tracks and the playing time of the
program will be shown on the screen and the player display.
When your FTS Program is complete, press B to start
playback or, press 3 to go back to Stop mode. In either
case, the FTS Program will be automatically memorized.
Switching FTS ON/OFF
1
Use 3 to move to FTS.
2
Use 2 or 1 to select either On or Off.
Erasing a track from an FTS Program
1
Use 4 to go to the list of selected tracks.
2
Use 2 and 1 to select the track number you wish to erase.
3
Press ENTER/OK.
➜ The track number will be erased from the list of selected
tracks.
Erasing the complete program
1
Use 4 to select CLEAR ALL, then press ENTER/OK.
➜ The complete FTS Program for the disc will be erased.
MP3 Disc Features
Support following MP3-CD formats (ISO9660
format):
¶ Max. 30 characters (filename or directory)
¶ Max. nested directory is 8 levels
¶ The max. album (directory) number is 32
¶ Supported variable bit-rate
¶ Supported sampling frequencies for MP3 disc are: 32 kHz,
44.1 kHz, 48 kHz
¶ Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192,
256 (kbps)
Following formats can’t be supported
¶ The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS
¶ Chinese filename
¶ The non-session closed discs
¶ The discs recorded under UDF format
O
PERATION