Yamaha GF12/12 Owner's Manual page 15

3
TAPE IN switch
This selects the signal that will be monitored by
the C-R OUT jacks and PHONES jack: either the
PFL/AFL bus, or the TAPE IN jacks.
4
C-R MONITOR LEVEL (control room moni-
tor level) control
This adjusts the level of the signal that is sent to
the C-R OUT jacks. It does not affect the output
signal of the PHONES jack.
5
PHONES LEVEL (headphone) jack
This adjusts the level of the signal that is sent to
the PHONES jack. It does not affect the output
signal of the C-R OUT jacks.
TAPE IN
ST PFL/AFL
L R L R
L
ON
ST
R
Tape input and monitor output signal flow
6
PHONES (headphone) jack
A set of stereo headphones can be connected to
this jack for monitoring. This jack will output the
same signal as the C-R OUT jacks. The wiring of
this jack is as shown in the following diagram.
1/4" TRS phone plug
from STEREO OUT L
from GROUP OUT 1
from STEREO OUT R
from GROUP OUT 2
from GROUP OUT 3
from GROUP OUT 4
METER SELECT
BA
C-R MONITOR
TAPE IN
LEVEL
BA
BA
PHONES
LEVEL
BA
Master controls
Tip (hot)
Ring (cold)
Sleeve (ground)
L
C-R OUT
R
PHONES
—Owner's Manual
15