Yamaha PJP-100H Owner's Manual page 33

Ip audio conference system
Hide thumbs Also See for PJP-100H:
Table of Contents

Advertisement

To specify the area to which this feature is available, use
the numeric keys in "Microphone Mode" menu.
According to the pressed keys, audio in the area of the
following figure is picked up or not.
1
2
7
8
Microphone indicators (blue LED) of which direction
audio can be picked up from light up. This mode indicated
by
on the display.
y
• Press
to pick up audio from all directions.
5
• You can select multiple areas at the same time.
• You can select areas to where the audio pickup feature is not
applied.
Using the keys on this unit
In the initial display, select "Menu" → "Settings" →
"Sound Settings" → "Microphone Mode".
y
You can display "Microphone Mode" menu by pressing
continuously in the initial display or calling display.
Using the web menu
In the web menu, select "Microphone Mode".
■ Configuring the speaker mode
You can select the mode of audio output from the speakers
during call. The default setting is "Divide".
• Divide: When this unit communicates with multiple
locations, the audio from other units is divided
according to their locations. This mode is indicated by
on the display.
The position from which the audio from each location
is assigned automatically according to the number of
connected locations, that is, to the left/center/right
positions in a conference call with 3 locations, to the
left/center positions in a conference call with 2
locations and only to the center position in a call with a
single location.
• Monaural: Even during call with more than one
location, the audio from other units is not divided
according to their locations. This mode is indicated by
on the display.
Within 2 m
3
1
2
3
4
5
6
7
8
9
0
MUTE
VOL
9
Within 2 m
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
• Small Area: The area from which the audio from other
units is limited as shown below (monaural output).
This mode is indicated by
• Medium Area: The area from which the audio from
other units is limited as shown below (monaural
output). This mode is indicated by
• Large Area: The area from which the audio from other
units is limited as shown below (monaural output).
This mode is indicated by
Notes
• When "Connection Mode" (page 27) is set to "Cascade Server"
or "Cascade Client", the audio is always output in the monaural
speaker mode even when "Divide" is selected.
• When "Speaker Mode" is set to "Divide", the speaker output
positions depend on an connected order. To change the speaker
output positions according to locations, see "Changing the
speaker output positions according to locations" (page 23).
Setting Menu List
on the display.
1
2
3
4
5
6
7
8
9
0
MUTE
VOL
on the display.
1
2
3
4
5
6
7
8
9
0
MUTE
VOL
on the display.
1
2
3
4
5
6
7
8
9
0
MUTE
VOL
29

Advertisement

Table of Contents
loading

Table of Contents