This function lets you divide one track into two separate
tracks by adding a new track number to a certain point in
the track. If you add a track number at the beginning of a
section you want to hear, you can access it quickly by
using the skip function during playback. After you divide a
track, the total number of tracks increases by one and the
tracks following the divided tracks are renumbered.
NATURAL SOUND MINIDISC RECORDER MDX-9
Press # PLAY/* PAUSE to play the track you
want to divide.
Use SEARCH ! or ⁄ to locate the point
where you want to divide the track, then press #
PLAY/* PAUSE to pause at that position.
Press EDIT repeatedly to display "Divide ?", then
"Check" appears momentarily, then "Divide OK ?" appears
and the unit starts repeating the point where the track will be
If necessary, use the jog dial to adjust the
position of the point where the track will be
The divide position can be adjusted up to 2 second (255
steps) in either direction.
The track is divided and "Complete" appears
To cancel before dividing the track
Press CANCEL (or & STOP).
To undo DIVIDE
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display "Undo Divide", then
"Undo OK ?" appears in the display.
Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
• You can also combine the tracks later using the COMBINE