Remote Control - Yamaha CDR-D651 Owner's Manual

.................................................................. PREPARATION

Remote Control

I Loading the batteries in the remote control
1
3
2
1.
Remove the battery compartment cover on the
back of the remote control.
2.
Insert the batteries (AA, UM-3 or R6 type)
according to the polarity markings on the inside of
the battery compartment.
3.
Close the battery compartment cover.
Battery replacement
If you find that the remote control must be used closer to
this unit than usual, the batteries are weak. Replace
batteries with new ones.
Notes
• Use only AA, UM-3, R6 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside the
battery compartment.)
• Remove the batteries if the remote control will not be used for an
extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before installing
new batteries.
I Remote control operation range
NATURAL SOUND CD RECORDER CDR–D651
POWER
DISPLAY A
A
DISC
Within approximately 6 m
(20 feet)
Notes
• There should be no large obstacles between the remote control
and this unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.), it
might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
INPUT MULTI JOG
PUSH MODE
REC MODE TRACK NO.
DISC A DIGITAL ANALOG
COPY
FINALIZE ERASE
DIGITAL REC LEVEL
TEXT/TIME DISPLAY B
B
DISC
Recordable
ReWritable
PHONES LEVEL REC MUTE REC ANALOG REC LEVEL
MIN MAX FADE IN/OUT MIN MAX
Remote control
sensor
5
E-