Maintenance; Optional Remote Control Transmitter - Yamaha KX-10 Owner's Manual

CLEANING OF THE TAPE PATH
Continued high quality performance of your deck is
dependent upon periodic cleaning of the heads, capstan,
pinch roller, and all surfaces over which the tape travels.
Normal use will cause an accumulation of dirt and dust on
the heads, capstans, and pinch rollers. This can lead to
poor sound quality, drop outs (intervals with no sound),
unsteady tape speed, loss of high frequency response, etc.
Thus, clean the heads and all surfaces over which the tape
travels with a commercially available cleaning cassette.

OPTIONAL REMOTE CONTROL TRANSMITTER

With the optional remote control transmitter RS-KX1, you
can operate this unit at your listening position. For details,
refer to the instruction manual supplied with the remote
control transmitter.
RESET MEMORY
COUNTER
REMAIN
DUBBING
INTRO SCAN
!
SEARCH
DECK A/B
DIR A DIR B MONITOR
! PLAY
STOP
REC/PAUSE REC MUTE
s
REMOTE
CONTROL
TRANSMITTER

MAINTENANCE

TAPE
These shaded
buttons control
this deck.
DEMAGNETIZATION
After 20-30 hours of use, enough residual magnetism will
build up on the heads to cause poor high frequency
reproduction. At this time you should use a commercially
available head demagnetizer.
¶ When demagnetizing the heads, be sure to follow the
instructions of the head demagnetizer carefully.
REMOTE CONTROL OPERATION RANGE
Remote sensor
6 m (20 feet)
30°
30°
13