Connecting The Power Cord; Connecting Other Sources - Bose Companion 3 Owner's Manual

S C
ETUP AND ONNECTIONS
10

Connecting the power cord

Plugging in and turning on the Acoustimass
1. Insert the small connector end of the power cord into the AC INPUT jack on the module.
2. Plug the large connector into an AC power (mains) outlet.
3. Turn the power switch, located on the back of the Acoustimass module, to ON (|).
On the control pod, the LED turns yellow to indicate the system is on and is ready for use.

Connecting other sources

The control pod features two jacks: one for connection directly to another sound source and
the other for a headphone.
• To connect an external CD or MP3 player to your system, plug the cable from the sound
source output jack into the input jack ( ) on the control pod. See Figure 8 on page 11.
• To connect headphones, insert the connector on the headphone cable into the headphone
jack on the control pod. This connection mutes the sound from the speakers.
!"#$%&'()*%)+#,-*./01&2 2 34!5
Français Español
® module is the final step before using the system.
English