Standby And Power Led Indicators - Bose Cinemate Cinemate Digital Home Theater Speaker System Owner's Manual

S S
YSTEM ETUP
Figure 13
Power cord as the final
connection
Figure 14
Standby and power LEDs
on the Interface module
12
Note: On 220-240V models only, turn the Acoustimass
AC power switch
Provided on 220-240V
rated systems only
Note: Bose recommends using a safety agency-approved surge protector on all electronic
equipment. Voltage variations and spikes can damage electronic components in any system.
A quality suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.

Standby and Power LED indicators

Once you have connected the CineMate
of the Interface module will light, indicating that the system is in Standby mode.
When the system is powered on, the green LED on the front of the Interface module will light.
The green LED will flash each time the Interface module receives a command from the
remote.
Power LED (green)
Français
AC power
connector
™ system to a power source, the red LED on the front
Español
® module POWER switch to on (l).
115/230V selection switch
Provided on 115/230V
dual-voltage rated systems only
Standby LED (red)
English