Summary of Contents for XM Satellite Radio XMR6910
Page 1
INSTALLATION/OWNERS MANUAL AM/FM/CD/XM Ready Receiver with Detach Face An optional XM Satellite Radio Receiver may be connected to the XMR6910. XM subscription is required for reception. For more information, visit XM’s website at www.xmradio.com or call 1-877-XMRADIO. Not available in Alaska or Hawaii.
XMR6910 Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
XMR6910 INSTALLATION Wiring Diagram FUSE When replacing a fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XMR6910 uses one 10 amp ATM fuse located beside the wiring connector.
Mode/Shift EQ/*Preset 10 Loudness/*Preset 9 An optional XM Satellite Radio Receiver may be connected to the XMR6910. XM subscription is required for reception. For more information, visit XM’s website at www.xmradio.com or call 1-877-XMRADIO. Not available in Alaska or Hawaii.
Mode Press MODE to select between AM/FM, *XM Radio, CD and auxiliary input. Modes of operation are indicated in the display. *Optional XM Satellite Radio Receiver and subscription required for XM Radio operation. Volume Adjust volume using rotary encoder (00-46).
Page 6
XMR6910 General Operation Display Set the Clock 12/24-hour Clock Programmable Display Priority Programmable Clock Priority Reset OPERATION When in AM/FM, CD or AUX mode: Press DISP to select between clock and radio frequency (tuner mode), clock and CD elapsed time/track (CD mode), or clock and AUX (AUX mode).
Page 7
Bass Treble Balance Fader Source Audio Memory Confirmation Beep Mute XMR6910 General Operation Press AUDIO to select between Volume (default), Bass, Treble, Balance & Fader. Press AUDIO until BAS appears Rotate encoder left/right to adjust (+6 maximum / -6 minimum)
XMR6910 AM/FM Tuner Operation Seek Tuning Manual Tuning Scan Tuning Local/Distance Band Frequency Spacing Storing and Recalling Station Presets Automatically Store Stations Preset Scan OPERATION Press TUNE or TUNE next strong station. Press TUNE or TUNE then release. "MANUAL" will momentarily appear in the display.
5. Activate your XM Satellite Radio service. To subscribe, log onto http://www.xmradio.com/activation or call 1-800-852-9696. Note: You will need to keep your XMR6910 turned on for at least one hour after requesting activation to receive the full channel line-up. XM Radio - Operation Press BAND to select between XM DIRECT, XM1 and XM2 bands.
Page 10
XMR6910 OPERATION XM Radio Operation Channel Search by Press FUNC once, the CATEGORY icon will appear on the Category display. Press to choose a different category, then press TUNE or TUNE to choose a channel within that category. Press FUNC for 3 seconds to select the desired channel.
Intro Repeat Random CD-R/CD-RW Compatibility XMR6910 CD Player Operation With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD. The unit will change to previous mode of operation (AM, FM, XM or auxiliary input).
XMR6910 Limited One-Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material...
XMR6910 CD Player Signal-to-noise: Frequency response: Channel separation @ 1kHz: D/A converter: FM Tuner Tuning range: Usable sensitivity: 50dB quieting sensitivity: Stereo separation @ 1kHz: Frequency response: AM Tuner Tuning range: Usable sensitivity: Frequency response: General Total power output: Power output:...
XMR6910 Troubleshooting - General Problem Unit will not turn on Yellow wire not connected or incorrect voltage (no power) Red wire not connected or incorrect voltage Black wire not connected Fuse blown Speaker wires not connected Unit has power (but no sound)
Page 15
CH --- appears on display Selected channel is not available XMR6910 Troubleshooting - XM Radio Cause Contact XM as described on page 9 Verify your subscription with XM...