Introduction; General; Packet Content; Appropriate Use - Honda Loke-26 4T Instruction Manual

1. INTRODUCTION

1.1

GENERAL

Thank you for purchasing our drill. We want to help you to get the best results from your product and to
operate it safely. This manual contains information on how to do that: please read it carefully before
operating the drill. If a problem should arise, or if you have any question about your drill, consult an
authorized service dealer.
All information in this publication is based on the latest product information available at the time of printing.
The manufacturer reserves the right to make changes at any time without incurring any obligation.
This manual should be considered a permanent part of the product and should remain with it if resold.
1.2

PACKET CONTENT

N°1 Drill
N°1 Tool kit
N°1 Operator's manual
N°1 Shoulder strap
N°1 Quick change keyless chuck (only Loke-26 4T)
1.3

APPROPRIATE USE

Drill could be used to drill (for diameter see "Technical characteristics") in concrete, bricks, rock, ice and
snow. Excluding rotation drill could be used to chiseling, chasing or demolishing. Only use it in the outside, in
open air or well-aerated rooms.
Operators are responsible for damages or accidents caused by misuse of the product.
1.4

GENERAL DRILLS SAFETY WARNINGS

Read all safety warnings and all instructions. Save all warnings and instructions for future reference. Failure
to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
1- Work area safety
 Keep work area clean and well lit . Cluttered or dark areas invite accidents.
 Do not operate drill in explosive atmospheres, such as in the presence of flammable liquid , gases or dust.
Drill create sparks which may ignited the dust or fumes.
 Keep children and bystanders away while operating a drill. Distractions can cause you to lose control.
2- Personal safety.
 Stay alert, watch what you are doing and use common sense when operating a drill . Do not use a drill while
you are tired or under the influence of drugs, alcohol or medications. A moment of inattention while
operating drill may result in serious personal injury.
 Understand the operation of all controls and learn how to stop the drill quickly in case of emergency. Make
sure the operator receives adequate instruction before operating the equipment.
 Do not allow children to operate the drill. Keep children and pets away from the area of operation.
 Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat or hearing protection used for appropriate condition, will reduce persona
injuries.
 Your engine exhaust contains poisonous carbon monoxide. Do not run the engine without adequate
ventilation, and never run the engine indoor.
 Remove any adjusting key or wrench before turning the drill on. A wrench or a key left attached to a rotating
part of the drill nay result in personal injury.
__________________________________________________________________________________________________
5