Periodic Inspection - TOHATSU MFS 5D LPG Owner's Manual

50
INSPECTION AND MAINTENANCE
ENOM00431-0

2. Periodic Inspection

It is important to inspect and maintain your outboard motor regularly. At each interval
on the chart below, be sure to perform the indicated servicing. Maintenance intervals
should be determined according to the number of hours or number of months, which-
ever comes first.
Description
Hose
Mixer
Fuel System
Regulator
Shut off valve
Spark plug
Ignition
System
Spark plug cap/
High tension cord
Starting
Starter rope
System
Engine oil
Oil strainer
Oil tank
Valve clearance
Engine
10
Idling speed
Compression
pressure
Combustion
chamber
Thermostat
Propeller
Shear pin/Split
pin
Gear oil
Lower Unit
Water strainer
Water pump
impeller
Water pump
housing
Inspection intervals
Every Every Every Every
First 20
50 100 200
hours
hours hours hours hours
of 1
of 3 of 6 of 1
month
months months year
/ /
/ /
Replace Replace
/ /
Replace Replace
/
Replace
400
Inspection procedure
of 2
year
Check /Replace if necessary
Check /Replace if necessary
Check /Replace if necessary
Check /Replace if necessary
Check and clean
Check /Replace if necessary
Check /Replace if necessary
Replace
Check and clean
Check
Check and adjustment
Check /Adjust
Check
Clean
Check
Check and replace if necessary
Check and replace if necessary
Check and replace
Check
Check /Replace if necessary
Check and replace if necessary
Remarks
Gap 0.8–0.9 mm
(0.031–0.035 in)
Approx.450 mL
(15.2 fl.oz)
Refer to P50
IN:
0.06–0.14 mm
(0.0024–0.0055
in)
EX:
0.11–0.19 mm
(0.0043–0.0075
in)
Refer to P54
Refer to P54
195 mL (6.6 fl.oz)
Refer to P53