Table of Contents
Advertisement
MEDIA INFORMATION
Loading the Media - Roll 4
10. Rotate the green knob in
order to feed an inch of
paper between the feed
rollers.
BELT
11. Set the switches for the
series and type of media
you have loaded, from
front to rear:
Film
Vellum
Plain Paper
Eng. (8.5"/11") or Arch.
(9"/12")
NOTE: Ensure that the rubber
tracking belt is underneath the
plastic roller on the paper
spindle. If not, the printer will
indicate an out-of-paper
condition.
12. Push the drawer in until it
is closed and latched.
12
Advertisement
Table of Contents
