Jam Clearance With 2-Sided Printing - Xerox DocuColor 7002 Quick Start Manual

Digital press
Hide thumbs Also See for DocuColor 7002:
Table of Contents

Advertisement

Exercises
DocuColor 7002/8002

Jam clearance with 2-sided printing

WARNING
Be careful when clearing jams in the Fuser area. The Fuser is extremely hot and will cause injury.
When printing 2-Sided output, the UI will direct you to clear the following areas if a jam occurs.
1. Open the Right and Left Front Doors when directed to by a UI message.
2. Lift handles 5 and 6 and clear any paper in the areas.
6
5
CAUTION
Paper can rip if not pushed back before removing it from under the lip of this area.
3. Push the paper back until you see the front edge, then remove the paper.
4. Reposition handles 5 and 6 by closing firmly.
5. Close the Right and Left Front Doors.
6. Follow the instructions on the UI to restart your print job.
16
Quick Start Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 8002

Table of Contents