Table of Contents
Advertisement
FREEFLOW PRINT SERVER 6.0.xx
W-6: Network configuration worksheet
18
Fill out the appropriate worksheet for the network configuration
the customer is using. This information is used to configure the
network through the FreeFlow Print Server Network
Configuration screens.
For further information on each network configuration, refer to
the FreeFlow Print Server on-line help.
IP Configuration
Two options are available for configuring TCP/IP on the
FreeFlow Print Server.
Static IP configuration requires that the System Administrator
enter the hostname, IP address, default router gateway, and
subnet mask information into the Network configuration UI. This
information is available on Worksheet W-1.
DHCP, or Dynamic Host Configuration Protocol, retrieves the
values for the configuration from the DHCP server on the
network. The System Administrator can rewrite the hostname.
NIS/NIS+
The Network Information Service (NIS and NIS+) provides
simple network lookup services. The purpose of NIS and NIS+
is to provide information that needs to be known throughout the
network to all machines on the network.
If the Domain Name, Server IP Address, and Server Name are
not known, select Find One in the dialog. The appropriate
information is obtained from the NIS/NIS+ server on the
network. The server must be configured to accept broadcast
requests.
Data Element
Find NIS+ Server
NIS/NIS+ Domain Name
NIS/NIS+ Server IP address
NIS/NIS+ Server Name
XEROX FREEFLOW PRINT SERVER
GETTING READY FOR THE PRINT SERVER INSTALLATION
Customer Value
Find one
Specify
Advertisement
Table of Contents
