Table of Contents
Advertisement
Standby Timer
"Disable".The CPU and the VESA Local Bus operation frequency slows
down to 8 MHz and the video signal is suspend if no Power Management
events occur for a specificed length of time. Full Power functions return
when a Power Management event is detected.
Suspend Timer
The VESA Local Bus operating frequency slows down to 8 MHz, the
CPU clock is stopped
Outs"(JP2, JP3) are drived to logic low, if no Power Managment events
occur for a specificed length of time. Full power functions return when a
Power Management event is detected.
Video RAM Access AOOO-BFFFh :The default setting
this option to enabled to permit local bus access to the
in system memory at AOOOh - BFFFh.
Local Bus Master Access
bus master device access. The defaults setting is "Enabled".
DMA Request
:
System IRQ Events
monitored. If you are not
enable every IRQ except
Operation System.
Setting range from "10 Sec" to "1 Hr" and
:
:
Setting Range from "10 Sec" to "1 Hr" and "Disabled".
the video signal is suspended, and the "SM
,
:
Set this option to "Enabled" to permit local
Set this option to "Enabled" to permit local bus DMA
requests. The defaults setting is "Enabled".
:
These features determined which IRQs are
sure which IRQs s h o u l d be monitored, just
IRQ8. IRQS can only be enable under OS2
is "Disabled". Set
video BIOS area
Advertisement
Table of Contents
