BILL OF MATERIALS Winch Post Top Net Attachment Eye-Bolt 5/16” Flat washer Center Post (non-winch) D-Ring Strap 5/16” Lock washer 5/16” Hex Nut Net Tensioner (75 lb. Load) Tensioning Knob Rope Tensioner(150 lb. Load) Winch Assembly Carabiner Clips Competition Volleyball Net Post Padding Set of (4) Rope Covers Height Labels...
Page 3
Winch Post approximately 55” up from the playing surface as shown in Figure A. NOTE: Do not overtighten Winch hardware, doing so could cause damage to Galaxy carbon fiber post. 9. Using the 5/16” flat washer, lock washer and hex nut provided, attach the Welded Eye-Bolt to the top of the Center Post as shown in Figure A.
NET ATTACHMENT 1. Loosen Post Tensioning Knobs and telescope silver tubes down to approximately 7’ from the floor. 2. Unpack Competition Volleyball Net G. Lay net out flat on the floor. Slide wooden dowels provided into side pockets of net. Notice that the ropes are different lengths. The TOP of the net is the side with the SHORTER rope, called the TOP ROPE.
Page 5
NET HEIGHT ADJUSTMENT FOR SINGLE COURT SYSTEM 1. Starting with a loose top net rope, loosen the Tensioning Knobs on the post and adjust the silver slide tubes to the desired height as indicated on the height label. Tighten tensioning knobs.
Need help?
Do you have a question about the Galaxy and is the answer not in the manual?
Questions and answers