Xerox 90 Compatibility Manual page 22

5 of 20 Revision Nov 2008
iGen3 Digital Production Press Custom Media List - Europe - April 2010
The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.
Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.
Best Practices for Operation are outlined below.
Customers should validate the Best Practices for Operation are acceptable for their application.
*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*
When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.
CUSTOM media may be ordered through the Xerox Supply Account Manager.
Grammage
Base Size Tested
Weight (gsm)
Stock Library Name (Full Media Name)
It is imperative to utilize the bolded, abbreviated stock name for easy
Best Practices for Operation
Weight of the
migration to future enhancements to the stock library and media
Thickness
A4 A3 short grain SRA3 Other Size paper in grams Sides Coated Coating Type Type Sequence Color Cleanup Finish
management tools.
(microns)
per square meter
Simplex only recommended
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
007R96650
iGen3
XeroxPBoardEnsoCoat350 Coated One Feed from a lower tray only.
Max Size
350 350 Gloss Plain White 455 No Smooth
(Xerox Packaging Board EnsoCoat 350 gsm C1S) 007R966351 Sides To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
iGen3 Xtra LargeSize Output to top tray or bypass tray, if enabled.
Optimization of decurler settings may be needed for best stacking and runnability.
Some skew may be seen.