Parameter Definitions - Xerox 5 User Manual

Parameter definitions

VIPO_user
[:local|remote]
Defines the scope of the VIPO user, either local or remote.
•
•
•
profile_name
Specifies the name of a profile belonging to the VIPO_user on the lpd print server
associated with printername.
print_file_name
Specifies the same name as the printfilename parameter of the lpr command. This
parameter is required if any -T options are present. This duplicated name is an artifact of
the non-standard Windows 2000 lpd implementation.
printername
This is an lpr-to-VIPO printer defined on a VIPO Client on Windows 2000 running an lpd
server.
servername
This is an IP address or hostname of a VIPO Client running lpd. The host name is defined
in the file winnt/system32/drivers/etc/hosts.
VIPO-62
VIPO_user
:local — a local-scope VIPO user defined on the lpd print server
associated with printername.
VIPO_user
:remote — a remote-scope VIPO user reachable from the lpd print
server associated with printername.
If neither local nor remote is specified, local scope is searched first; if the user is not
found, then remote scope is searched. If the user is not found in either, the job
receives a submission error.
NOTE
If the –T option is omitted, this parameter is not needed and
printfilename is passed correctly to lpd.
NOTE
The initial printername must be created using the Install VI PDF
Originator LPR Option in the VIPO program folder or by checking the lpr
option when installing VIPO.
VI PDF Originator User's Guide
FreeFlow Variable Information Suite 5.0 (7/2006)