Xerox XR6 Series User Manual page 14

Xerox© LCD Monitor User's Manual
4
Press the button, located on the bottom side of the main
unit to turn the monitor on, then turn the computer on. If the
monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or
damage.
NOTE:
The button is used for switching the LCD monitor on and
off, it does not disconnect the device from the main voltage.
To completely disconnect the main voltage, please remove the
power plug from the socket.
NOTE:
The LED indicator is blue when the monitor operates normally
and will turn to amber when in power saving mode. When the
monitor is off, the LED turns dark.
Installation
13