Internal Interfaces - Xerox WORKCENTRE 7755 Information Manual

XEROX WorkCentre 7755/7765/7775 Information Assurance Disclosure Paper
Scanner Video
Habanero (SBC)
PSW USB Target Port
USB Host Ports
Ethernet
FAX line 1, RJ-11
FAX line 2, RJ-11
Foreign Device Interface (FDI)
Scanner
UI
SIM
2.2.1.4.

Internal Interfaces

The interfaces between the Copy Controller and other TOE subsystems (see ) are physically and logically internal to
the TOE. Proprietary protocols are implemented on all internal interfaces.
2.2.2. Network Controller Software (NC)
2.2.2.1. Purpose
The Network Controller provides both network and direct-connect external interfaces, and enables print, email,
network scan, internet FAX, and LanFAX functionality. Network scanning, Internet fax, and LanFax, are optional
Ver. 1.01, April 2010
Host USB
Host USB
Figure 2-5 Physical Map of Controller tray external connections
Table 2-4 Copy Controller external connections
Interface
Table 3 Copy Controller External Connections
enet
SIM
FDI
Description / Usage
Diagnostics and service; Xerox Copier Assistant
card readers; SW upgrade; USB Printing
Network Connectivity
Supports FAX Modem T.30 protocol only
Supports FAX Modem T.30 protocol only
Allows connection of optional access control hardware
(accessory not present in evaluated TOE)
Proprietary connection between the Scan Module and
the Copy Controller
Video and power
Options enablement
8
Ttarget
UI Power and Video
USB
Page 8 of 40
Fax
Line 1
Fax
Line 2