Installing The Ink Tanks - Canon PIXMA TR150 Getting Started

Setting Up the Printer
2
Press inward on both tabs on the print head lock
lever to release the lock, and then raise it firmly
until it stops.
3
Remove the print head from its package.
Important
There may be some transparent or light color ink on the inside
of the bag the print head comes in - this has no effect on print
quality. Be careful not to get ink on yourself when handling
these items.
4
Remove the protective cap.
Important
Do not touch the areas shown in
the figure. Otherwise, the printer
may not print correctly.
5
Set the print head in the print head holder so
the mark faces inward.
2
6
Hold both tabs on the print head lock lever, and
then lower it.
Important
Once you have installed the print head, do not remove it
unnecessarily.
7
To lock the print head lock lever, push the left
and then the right tabs until they snap into
place.

5. Installing the Ink Tanks

1
Remove the orange cap from the Black ink tank.
Black
2
Install the ink tank.
•
Insert the ink tank into the right-hand side of the
print head so the
press down until it clicks.
•
Check that the lamp on the ink tank is lit. If the lamp
is not lit, press down on the back of the ink tank.
mark faces inward, and then