Commissioning
• Adjust the cable so it does not get snagged.
• Secure the product to the mounting bracket by
locating the screws through the "L" shaped slots (C)
in the ceiling cover and tightening the screws.
Fitting/replacing bulbs (Max. 50W GU10)
• When changing a bulb, always switch off at the
mains and allow the bulb to cool before handling.
Dispose of used bulbs carefully. Do not exceed the
wattage stated or use a different shape bulb from that
indicated on the fitting.
• Use a soft cloth to handle bulbs, avoid directly
touching the bulbs as this will shorten their life.
• Remove bulb by turning a quarter turn anticlockwise
and pulling out.
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
WWW.saxbylighting.com
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
• Push the bulb gently into the lampholder and twist a
quarter turn clockwise to engage pins.
MAX.
50W
GU10
Iss.1 13/12/2018
Saxby lighting. BH23 3PE
Instruction leaflet
Arezzo 4 Bar Spotlight
73686, 73689
Need help?
Do you have a question about the Arezzo 4 and is the answer not in the manual?
Questions and answers