Hitachi CA-HF1300-S3 Operating Instructions Manual page 28

Function menu
2.
OUTPUT SELECT menu
■ＯＵＴＰＵＴ ＳＥＬＥＣＴ
ＨＩＧＨ ＳＰＥＥＤ ： １０８０ｉ
ＨＤ／ＳＤ１［１／２］ ： １０８０ｉ
ＨＤ／ＳＤ２［１／２］ ： １０８０ｉ
ＨＤ／ＳＤ３［１／２］ ： １０８０ｉ
ＷＦＭ／ＰＩＸ ： １０８０ｉ
ＡＳＰＥＣＴ ［ＳＤ］ : １６：９
Item Setting
HIGH SPEED 1080i,720p
HD/SD1[1/2] 1080i,720p,SD
HD/SD2[1/2] 1080i,720p, SD
HD/SD3[1/2] 1080i,720p, SD,
TRUNK VIDEO
WFM/PIX 1080i,720p, SD
ASPECT[SD] 16:9, 4:3
(*1) NOTE
- Before changing the output signal, please confirm if your monitor can receive the signal format.
3.
RETURN SELECT menu
■ＲＥＴＵＲＮ ＳＥＬＥＣＴ
ＲＥＴ．ＣＨ ＳＥＬＥＣＴ
ＣＨ１ ：ＲＥＴ．１
ＣＨ２ ：ＲＥＴ．２
ＣＨ３ ：ＲＥＴ．３
ＣＨ４ ：ＲＥＴ．４
ＣＡ ＨＤ－ＳＤＩ ：ＲＥＴ．Ｂ１
ＡＳＳＩＧＮＭＥＮＴ：
Factory setting
1080i Assigns output signal of HIGH SPEED OUTPUT connector
.
1080i Assigns output signal of HD/SD1[1/2] connector.
1080i Assigns output signal of HD/SD2[1/2] connector.
1080i Assigns output signal of HD/SD3[1/2] connector.
When TRUNK VIDEO is selected, an external video source
(1080i) is fed from CA-HF1300-S3.
1080i Assigns output signal of WFM/PIX connectors.
16:9 Sets aspect ratio of SD video.
Item Setting
CH1 RET.1,
RET.2,
RET.3,
CH2
RET.4
CH3
CH4
CA HD-SDI RET.B1,
RET.B2
ASSIGNMENT -
Description
Factory
setting
RET.1
Assigns the return video signal to CH1 selected when
CA-HF1300-S3 RET switch is set to 1.
RET.2
Assigns the return video signal to CH2 selected when
CA-HF1300-S3 RET switch is set to 2.
RET.3
Assigns the return video signal to CH3 selected when
CA-HF1300-S3 RET switch is set to 3.
RET.4
Assigns the return video signal to CH4 selected when
CA-HF1300-S3 RET switch is set to 4.
RET.B1
Assigns the return video signal to the HD-SDI output on
CA-HF1300-S3.
-
Moves to the ASSIGNMENT submenu
14
Description