Siemens Bently Nevada 3500 Proximitor Maintenance And Troubleshooting Manual page 26

3500/42 Operation and Maintenance
* Module Removed from Rack
Event Number: 325
Event Classification: Typical Logged Event
Action: No action required.
Module Inserted in Rack
Event Number: 326
Event Classification: Typical Logged Event
Action: No action required.
Device Events Lost
Event Number: 355
Event Classification: Typical Logged Event
Action: No action required.
Module Alarms Lost
Event Number: 356
Event Classification: Typical Logged Event
Action: No action required.
* Module Entered Calibr.
Event Number: 365
Event Classification: Typical Logged Event
Action: No action required.
Module Exited Calibr.
Event Number: 366
Event Classification: Typical Logged Event
Action: No action required.
Pass Module Self-test
Event Number: 410
Event Classification: Typical Logged Event
Action: No action required.
* Enabled Ch Bypass
Event Number: 416
Event Classification: Typical logged event
Event Specific:
Action: No action required.
Monitor Module will stop alarming.
This may be due to the removal of the Rack Interface Module for an
extended period of time.
This may be due to the removal of the Rack Interface Module for an
extended period of time.
Monitor Module will stop alarming.
(Module Exited Calibration Mode)
Ch x
Alarming has been inhibited by this action.
(Module Entered Calibration Mode)
(Enabled Channel Bypass)
Troubleshooting
201