Worksaver ATVK-350, ATVK-370, ATVK-390 Owner's Manual

Broadcast seeder - spreader

Advertisement

Quick Links

OWNER'S
MANUAL
MODEL NO.'s
ATVK-350
ATVK-370
ATVK-390
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SINO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
STATEMENT
OF POLICY
It is the policy of Worksaver,
Inc. to improve its products
where it is possible and practical
to
do
so.
Worksaver, Inc.
reserves the right to make
changes or improvements in
design and construction at any
time, without incurring the oblig-
ation to make these changes on
previously manufactured units.
ATTENTION!
1. Read instruction manual and make sure all operators are knowledgeable on
correct operation of equipment and familiar with the Safety Rules of Operation.
2. Never allow riders on equipment.
3. When operating on rough or uneven terrain, use extreme caution and a safe
operating speed.
4. When spreading seed or fertilizer, always use safety goggles.
5. Never operate equipment when anyone is within 50 feet of seeder/spreader.
Before operating equipment – If you have any questions regarding the proper assembly or
operation, contact your dealer or representative.
Broadcast Seeder - Spreader
Safety Instructions
Tractor Preparation
Operating Instructions
SAFETY RULES
ATV
Assembly & Mounting
Maintenance
Repair Parts

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATVK-350, ATVK-370, ATVK-390 and is the answer not in the manual?

Questions and answers

Summary of Contents for Worksaver ATVK-350, ATVK-370, ATVK-390

  • Page 1 A AIGUIEN QUE SI LO LEA PARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD. STATEMENT OF POLICY It is the policy of Worksaver, Inc. to improve its products where it is possible and practical Worksaver, Inc. reserves the right to make...
  • Page 2 To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. Read the safety messages on the implement and shown in your manual.
  • Page 3: Safety Information

    S A F E T Y I N F O R M ATION ( continued) All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes potential hazards and follows reasonable safety practices. When the use of hand tools is required to perform any part of assembly, installation, adjustment, maintaining, repairing, removal, or moving the implement, be sure the tools used are designed and recommended by the tool manufacturer for that specific task.
  • Page 4: Safety Signs

    S A F E T Y I N F O R M ATION Never operate broadcast spreader if anyone is within 50 ft. of ATV and spreader. Never use your hand or fingers to clear a jam of material in the feed gate. Use a clean stick or rod. When spreading any material, always use safety goggles or safety glasses with side shields.
  • Page 5: Vehicle Preparation

    VEHICLE PREPA R AT I O N The 12 volt electric seeder can be mounted on most all terrain vehicles. The ATV must have a 12 volt electrical system or you need to supply a separate 12 volt battery to power the spreader fan motor.
  • Page 6 INSTRUCTIONS P R E - O P E R AT I O N • Know your controls and how to stop ATV, engine, or pickup quickly in an emergency. READ THIS MANUAL AND THE ONE PROVIDED WITH YOUR ATV. • To avoid accident or injury, do not allow anyone to operate this equipment without proper instructions.
  • Page 7: Spreading Instructions

    INSTRUCTIONS SPREADING INSTRUCTIONS C A U T I O N ! KEEP ALL PERSONS AWAY FROM THE ROTATING SPREADERS FAN! NEVER OPERATE WHEN ANY- ONE IS WITHIN 50 FEET OF SEEDER/SPREADER. C A U T I O N ! Do not attempt to use your fingers to clear a jam. Accidental closing of the feed gate could pinch or amputate a finger.
  • Page 8 INSTRUCTIONS Since there is no agitator in the seed hopper, these materials will bridge at narrow seed gate settings and cause erratic seeding rates. If bridging occurs at wider seed gate settings, cleaning the seed or blending with a small dense seed such as clover may help. A mix of dry sand with the seed (50/50 mix) can sometimes solve the problem.
  • Page 9: Parts List

    ATVK-350 M O U N T I N G K I T PA RTS LIST ATVK-370 M O U N T I N G K I T PA RTS LIST ATVK-390 M O U N T I N G K I T PA RTS LIST...
  • Page 10: Parts Drawing

    AT V B R O A D C A S T S E E D E R - S P R E A D E R PA RT S D R AW I N G...
  • Page 11 AT V B R O A D C A S T S E E D E R - S P R E A D E R PA RTS LIST...
  • Page 12 A HOLIDAY FROM ACCIDENTS ATV Broadcast Seeder - Spreader WORKSAVER LIMITED WARRANTY W orksaver warrants its implements, parts and accessories to be free from defects in materials and workmanship for a period of six (6) months from date of purchase.

Table of Contents