Worksaver HK-307 Owner's Manual

3 pt. hitch adapter kit for allis-chalmers model ca tractors

Advertisement

OWNER'S
MANUAL
MODEL NO.
HK-307
CAUTION
For Operation
Read Rules And
Instructions Carefully
STATEMENT
OF POLICY
It is the policy of Worksaver,
Inc. to improve its products
where
it
is
possible
practical to do so. Worksaver,
Inc. reserves the right to make
changes
or
improvements
design and construction at any
time
without
incurring
obligation
to
make
changes
on
manufactured units.
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
1. Select an area for assembly that is clean and free
of any debris, which might cause persons
working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane,
jack, tackle, fork trucks or other mechanical
devices.
3. Preview the assembly instructions in your
operator's manual before proceeding further.
4. If the assembly instructions call for parts or
assemblies to be blocked up, use only blocking
material that is in good condition and is capable
of handling the weight of the assembly to be
blocked. Also insure that the blocking material is
on a clean, dry surface.
5. Never put hands, or any other part of body under
blocked up assemblies if at all possible.
Packing
Assembly & Mounting
Operating Instructions
and
in
the
these
previously
CAUTION
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
WORKSAVER, INC.
P.O BOX 100, LITCHFIELD, IL. 62056-100
Phone: 217-324-5973 Fax: 217-324-3356
E-Mail:
sales@worksaver.com
3 PT. HITCH ADAPTER KIT
HK-307
For Allis-Chalmers
Model CA Tractors
6. After completing assembly, thoroughly inspect
the machine to be sure that all nuts, bolts,
hydraulic fittings or any other fastened
assemblies have been thoroughly tightened.
7. Before operating the machine, thoroughly read
the operation section of your operator's
manual.
8. Before operation, read the maintenance section
of your operator's manual to be sure that any
parts requiring lubrication such as gearboxes
are full to avoid any possible damage.
9.
Before operating equipment. If you have
any
questions
assembly
Worksaver dealer or representative.
Web Site: www.worksaver.com
Maintenance
Repair Parts
.
regarding
the
or
operation,
contact
proper
your

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HK-307 and is the answer not in the manual?

Questions and answers

Summary of Contents for Worksaver HK-307

  • Page 1 MODEL NO. HK-307 CAUTION For Operation Read Rules And Instructions Carefully STATEMENT OF POLICY It is the policy of Worksaver, Inc. to improve its products where possible practical to do so. Worksaver, Inc. reserves the right to make changes improvements...
  • Page 2: Tractor Preparation

    BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety The Model HK-307 hitch adapter kit is designed for the Allis Chalmers Model CA tractors.
  • Page 3: Operation

    Instructions (Continued from page 1) implement. After the lift arms are connected to the implement, the stabilizer bars need to be reconnected and adjusted so that the implement is centered behind the tractor. Remove the top link bracket from the top link and place it around the rocker shaft of the tractor.
  • Page 4 EXPLODED PARTS VIEW OF FOR HK-307 Obey All Safety Warnings Page 3...
  • Page 5 S a f e t y S i g n - W a r n i n g ( P u l l f r o m D r a w b a r ) REPAIR PARTS FOR HK-307 3-PT. Hitch Adapter Kit...
  • Page 6: Safety Precautions

    (5) parts failing through use of implement for purposes other than those for which it was designed. The obligations assumed by Worksaver and the limitations expressed herein are in lieu of all other warranties expressed or implied.

Table of Contents