Download  Print this page

Woodstock D2485 How To Use

Hot melt glue gun – large
Hide thumbs
   

Advertisement

Hot Melt
Glue Gun – Large
Manufactured in China
for Woodstock International, Inc.
SHOP FOX
IS A REGISTERED TRADEMARK OF
®
1-800-840-8420
FAX: 360-671-3053
Visit our website @
HOW TO USE THE GLUE GUN:
1: Plug in gun. Load the glue sticks into the back of the gun.
2: Press trigger several times until the glue stick is firmly set into the inner tube.
3: Allow the glue gun to warm up for approximately 5 minutes.
4: Squeeze trigger until glue flows from the nozzle.
5: Glue need not be spread. Press surfaces together within 15 seconds. Use of clamps or other holding devices is not necessary. Clean surfaces for best bonding.
6: Unplug glue gun when finished. No clean up required. Never pull the glue stick out the back of the gun.
Use
" glue sticks only.
7
16
CAUTION:
Hot melt glue gets hot! Nozzle area temperature reaches 380°. If accidental contact should occur, do not try to remove the glue. Put in cold water immediately.
woodstockinternational.com
D2485

Advertisement

Table of Contents
loading

  Related Manuals for Woodstock D2485

This manual is also suitable for:

Shop fox d2485