Advertisement
Quick Links
TravelNet Data/Voice Cellular Router Installation Guide
Parts List:
• TravelNet Data/Voice Cellular Routers ( Models TN-2301/TN-2303/TN-2305)
• Green battery pack
• 110 volt power adapter
• Power line cord
• Edimax BR-6204WG WiFi Preconfigured Router
• 110 volt adapter with plug connector
• 3 foot Ethernet Cable
• RJ11 Phone Cable
• (2)External Antenna (white)
• (2)External Antenna mount with 14' cable
• (2)Stainless Antenna Mounts
• (2)SMA to TNC adapters
• Cable Entry Cover
• Aluminum Ground Plane (7 x 7 )
• Customer Package (clear envelope)
o 7 foot Blue Ethernet Cable
o (2)Black TNC Antenna
o TravelNet Quick Start,
o TravelNet User CD
• User Manual
• Troubleshooting Guide
Other items not included:
• Sealant (Consult your vehicle manufacturer for the best sealant for your roof
material.)
Ver. 1.5
4/21/2009
ATTENTION INSTALLER
- 1 -
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Winegard TRAVELNET TN-2301
Summary of Contents for Winegard TRAVELNET TN-2301
- Page 1 TravelNet Data/Voice Cellular Router Installation Guide ATTENTION INSTALLER Parts List: • TravelNet Data/Voice Cellular Routers ( Models TN-2301/TN-2303/TN-2305) • Green battery pack • 110 volt power adapter • Power line cord • Edimax BR-6204WG WiFi Preconfigured Router • 110 volt adapter with plug connector •...
- Page 2 TravelNet’s Cellular Router System is Preconfigured And Ready to Install with these Easy Steps Installation Instructions: ( Models TN-2301/TN-2303/TN-2305) 1. Install the TravelNet Router and Edimax Router equipment in a convenient place such as upper cabinet (Velcro works well on the base of the each unit). the unit so that the diagnostic lights can be viewed without moving the TravelNet Router and the Edimax Wireless Router.
- Page 3 Position the antennas near the cable entry point. Here the TravelNet unit was located in the front overhead (Figure 1) with the antennas mounted close by on the roof. Note that the antenna mounts are anchored to the 7” x 7” aluminum ground plane and that everything is well sealed.
- Page 4 mounts securely to the ground plane and coach roof as shown. Secure the antenna cable to the roof as shown. 4. Route the 2 antenna cables to the cable entry hole in the coach roof. Securely attach the cable entry cover over the cable entry point on the coach roof using screws and caulk (Figure 5) Antenna cables should be directed to the TravelNet Router.
- Page 5 Setup the TravelNet Data/Voice Terminal Setting up your Carrier Account. Your TravelNet-DV requires both a data plan for internet service and a voice plan for analog phone service. Locate the “Account Application” (yellow sheet) in the “End User Envelope”. AT&T systems (TN-2301) can be installed without the AT&T SIM Attention card, the SIM maybe installed later.
- Page 6 1. Remove Battery Compartment Door on the bottom of the unit. 2. Installing the AT&T SIM (Sprint and Verizon users skip to Step 3) Install the SIM Card into the SIM card holder in the battery compartment. • If applicable, remove the SIM Card from the larger plastic card holding it. •...
- Page 7 3. Install the Battery & Secure the compartment door. Install the Rechargeable Battery Pack into the battery compartment. Remove the battery compartment door, insert the battery connector into the battery terminal, arrange the battery pack in the compartment, and replace the battery compartment door.
- Page 8 Connect Ethernet cable to the Ethernet port on the TravelNet Network Port (as shown) and to the Edimax WAN port (as shown) Antenna cables not shown for clarity. 6. Attach Phone Cable Connect an RJ-11 Phone cable from a standard phone to the Phone input (J1 7.
-
Page 9: Led Status Table
8. Turn on Cell Router Power using switch. 9. Understanding the LED Lights Power Messaging Status No Power Messages AC/Batt Solid Voicemail Normal Slow Batt Only Flashing Fast Both Flashing AC/Batt Solid Charging Slow Low Batt Flashing Fast Flashing Solid Batt Fault Slow Batt... - Page 10 Attention Installer: Place “User Envelope” in cabinet or drawer for your customer. TravelNet Data/Voice (TN-2303) Terminal Setup Activate your Sprint TravelNet Data/Voice on the Sprint Network Your TravelNet Data/Voice requires a data plan for internet and a voice plan to hook up the analog phone.
- Page 11 1. When all devices are connected and powered on, use your computer to connect to the TravelNet Device Manager. Launch your Web browser (Internet Explorer or Firefox). • Go to the browser’s address bar, type http://192.168.1.1, and press Enter or •...
- Page 12 Proceed to Set Up a Wireless WAN Data Connection. • TIP: Bookmark the TravelNet Device Manager access page (http://192.168.1.1). 3. For Sprint Activation, manually enter your MSL/SPC Code (4a), your MDN (10-digit wireless phone number) (4b), and your MIN/MSID (usually also your 10-digit wireless phone number) (4c).
- Page 13 5. Click Setup, click Wireless WAN in the Setup menu. 6. PSD Auto Connect select Always On 7. Do a hard restart of all network devices in order, first the TravelNet Cellular Router, 2 the WiFi Router, and finally laptop. Activate your AT&T TravelNet Data/Voice (TN-2301) on the AT&T Network Set Up Your TravelNet Your AT&T TravelNet (TN-2301) requires a data plan for internet service and a voice...
- Page 14 NOTE; Do not touch the gold-colored areas of your SIM Card. 2. Install the Rechargeable Battery Pack into the battery compartment. (Fig. 20 above) With the battery compartment door open, insert the battery connector into • the battery terminal. • Arrange the battery pack in the battery compartment, so the battery connector wire is in the top right of the compartment.
- Page 15 In a vehicle environment, grounding to the frame and battery or alternator • can reduce static or buzzing during voice calls. Connect the Ethernet (RJ-45) cable to the Ethernet Port on the TravelNet D/V. (This cable will serve as the connection to your computer or WiFi Router or other network device in most configurations, including the primary Wireless WAN data connection.) Setting Up WiFi Security on the Edimax BR-6204WG Refer to the Edimax users guide CD for additional information.
-
Page 16: Wep Key Setup
WEP Key Setup Parameters Default Description Key Length 64-bit You can select the WEP key length for encryption, 64-bit or 128-bit. Larger WEP key length requires 26 hexadecimal characters Key Format Use hexadecimal digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. - Page 17 Use the following procedure to configure Windows XP with SP2 for your infrastructure mode wireless network when the wireless network adapter supports Wireless Auto Configuration: 1. When the computer is within range of the wireless router or Access Point (AP) operating in your home or small business, Windows XP should detect it and prompt you with a Wireless networks detected message in the notification area of your taskbar.
- Page 18 RV or boat that connects your computers, printers, cameras, games, and other accessories for easy access and enjoyment. QUESTIONS? CALL OUR SUPPORT LINE: 877-475-7771 or visit our website FAQ at http://www.winegard.com TravelNet Winegard Company Support: (877) 475-7771 FAX: 847-991-3328 Ver.
Need help?
Do you have a question about the TRAVELNET TN-2301 and is the answer not in the manual?
Questions and answers