Magic Remote Control Functions - LG LA62 Series Owner's Manual

30

MAGIC REMOTE CONTROL FUNCTIONS

MAGIC rEMOTE CONTrOL FuNCTIONS
This item is not included for all models.
When the message "Magic Remote Control battery is low. Change the battery." is displayed,
replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure to point
the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAuTION
y Do not mix old and new batteries, as this may damage the remote control.
y In Analogue TV and some countries, some remote control buttons may not work.
(Only LA620*, LA621*, LA64**, LA66**, LA69**, LA74**, LN570*, LN572*)
(POWEr)
Turns the TV on or off.
BACK
Returns to the previous level.
voice recognition
(Depending on model)
3d
Used for viewing 3D video.
(Depending on model)
Adjusts the volume level.
ꕌ ꕍ
P
Scrolls through the saved
programmes or channels.
MuTE
Mutes all sounds.
voice recognition (Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user's characteristics (voice, pronunciation, intonation and speed)
and the environment (noise and TV volume).
1 Press the Voice recognition button.
2 Speak when the voice display window appears on the left of the TV screen.
• The voice recognition may fail when you speak too fast or too slow.
• Use the Magic remote control no further than 10 cm from your face.
Pointer (rF transmitter)
SMArT
Accesses the Smart Home menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
Wheel(OK)
Selects menus or options and
confirms your input. Scrolls through
the saved programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the magic remote control works as
P
a regular remote control. To display
the pointer again, shake the magic
remote control from side to side.
/Q.MENu
Accesses the quick menus.
Accesses the Universal Control.