Advertisement
..
Configuring a Locally Attached IBM 3197 Display Station
To configure a 3197 Display Station to a work station controller (WSC) or to a
work station controller-extended (WSCE), enter the CRTDEVD command with
the following parameters:
Required: DEVD. DEVADR. DEVTYPE, MODEL. CTLU, WSCADR,
WSCKBD
Recommended: PRINTER or PRTFILE. TEXT
Optional: ONLINE. PUBA UT
The following shows the parameters needed to configure a local 3197 Display
Station Model C 1. C2, D I, or D2:
CRTDEVD
DEVD (display-station-name)
DEVADR (000000)
DEVTYPE (31
XX)I
MODEL (0002)
CTL U (work-station-controller)2
WSCADR (xxyyzz)
PRINTER (work-station-printcr-namc)
WSCKBD (yzzz)·\
TEXT ('sample work station')
Valid values:
xx
=
79 if your 3197 Display Station is a Model CI or C2.
xx
=
80 if your 3197 Display Station is a Model D I or
02.
Note:
Tire 3197 Model Dl or D2 Iras 132 column support on(l' when used with a
work station controller-extended ( WSC£).
The 3197 Display Station Model C2 or
02
(IBM Enhanced Keyboard) is only
supported when attached to a work station controller-extended (WSCE).
Valid values:
y
=
P if you have a IBM 122/ 124-key Typewriter Keyboard.
y
=
G if you have an Enhanced Keyboard.
zzz
=
Use the appropriate keyboard identifier for the 3179 or 3180 Display
Station and the 122/124-key Typewriter Keyboard or the Enhanced Keyboard.
You will want to refer to the IBM System/38 CL Reference Manual for
this information.
Chapter 2. Configuring the IBM 3197 Display Station and Printer on the System/38
2-3
Advertisement
