Interpreter's Control Center, Model IC-1
Description:
This self-contained audio control center lets interpreters listen to the program directly from the floor or another
interpreter while simultaneously interpreting into a microphone. Used as a stand-alone unit, the IC–1 is capable
of handling dual language applications. Used in tandem, multiple IC-1s may be combined to economically
handle up to four languages.
Interpreter Control Center, Model IC-1:
Dimensions, Weight:
Color:
Power:
INPUTS
Floor In, Relay In:
1/4" Microphone Inputs:
3.5 mm Microphone Inputs:
OUTPUTS
Key Out, Norm Out:
Phones:
CONTROLS
Volume:
Mic Switch:
Mute Switch:
Function Switch:
OFF Mode:
NORM Mode:
RELAY Mode:
KEY Mode:
Feedthru Jumpers:
J1
J2
Recommended Microphone
MIC 079
ON Indicator Light:
Warranty:
*90 day warranty on accessories
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
©2005, Williams Sound Corp. CAT 063C
7" (17.7 cm) W x 5.625" (14.3 cm) D x 3.125" (9.3 cm) H, 1.82 lbs (.83 kg)
Beige epoxy paint with black legends, blue bottom and side panels
External power supply, 12 VAC, 50 or 60 Hz, 10 VA, (TFP 008 Power Supply)
(A 240 VAC Power Supply is also available, TFP 008 HV)
3-Pin XLR female jack, balanced or unbalanced line-level, max. 3.8 Vrms,
Gain 6 dB, 43 kΩ input impedance
Left and right, 1/4" TRS phone jack, balanced or unbalanced mic-level,
max. 70 mVrms, gain 46 dB, supplies simplex DC power for electret mics,
1.75 kΩ input impedance
Left and right, 3.5 mm TRS phone jack, unbalanced (T,S) for condenser mics,
max. 70 mVrms, gain 46 dB, supplies DC power on tip, 1.75 kΩ input impedance
3-Pin XLR male jack, balanced or unbalanced line-level, 7.7 max. Vrms,
56 Ω source impedance
3.5 mm TRS phone jack, mono or stereo headphone, 8-32 Ω,
63.7 mW at 8 Ω load max
Left and right, rotary, controls headphones volume
3–way toggle. Selects left mic, right mic, or both.
Push button. Mutes left and right mics when depressed.
4-way push button. Selects OFF, NORM, RELAY, or KEY modes.
Floor input (FLOOR IN) is fed to the interpreter's headphones to allow monitoring of the meeting.
Interpreter's microphones are muted.
Floor input (FLOOR IN) is fed to the interpreter's headphones. The selected interpreter's microphone
is fed to the normal output (NORM OUT).
Interpreter monitors the relay input (RELAY IN) while the selected microphone feeds the normal output (NORM OUT)
Used to feed a second language audience. The interpreters monitor the floor input (FLOOR IN)
while mics feed the key output (KEY OUT).
Located on bottom of cabinet. Used to select floor signal feedthru options.
Feeds the floor signal to the normal output (NORM OUT)
Feeds the floor signal to the key output (RELAY OUT)
Dual headphone, condenser mic, 3.5 mm plug (MIC 079), Audio Indicator Light: Yellow LED,
flashes when audio signal is present
Green LED, glows when power is applied to the transmitter. There is no on/off switch.
The T17 is designed to be left on continuously.
3 years, parts and labor*
®
Williams Sound
Helping People Hear
1