Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Whynter FX-7SB/W
- Page 1 Cold Water Dispenser & MODEL# : FX-7SB/W Instruction Manual Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Instructions……………………………...3 Safety Precautions………………………….3 Grounding Instructions……………………..3 Proper Disposal of the Dispenser…………4 Parts Overview……………………………...4 Proper Installation and Location…………...5 Prior to First Time Use………………………...5 Loading the Dispenser………………………...5-6 Using the Hot Water Tap……………………... 6 Specifications…………………………………...6 Cleaning and Caring for the Dispenser …...6 Cleaning the Dispenser Cabinet…………..6 Cleaning the Condenser…………………...6 Cleaning the Drip Tray and Grille…………6... -
Page 3: Safety Instructions
Unplug the water dispenser before cleaning and making repairs. Note: We strongly recommend that any servicing be performed by a qualified individual. If your WHYNTER water dispenser requires servicing or you have technical questions, please contact our service department. ... -
Page 4: Proper Disposal Of The Dispenser
PROPER DISPOSAL OF A WATER DISPENSER CFC DISPOSAL of your old water dispenser unit. Your Whynter Water Dispenser does not utilize CFCs. Your old water dispenser may contain a cooling system that used CFC’s (chlorofluorocarbons). CFC’s are believed to harm stratospheric ozone. If you are throwing away your old dispenser, make sure the CFC refrigerant is removed for proper disposal by a qualified service person. -
Page 5: Proper Installation And Location
PROPER INSTALLATION AND LOCATION LOCATION The water dispenser should be installed in an environment where the temperature ranges between 10ºC/ 50ºF and 33ºC / 90ºF. Relative humidity should not be higher than 90% Avoid direct sunshine TIPS If the dispenser is not going to be used for an extended period of time, turn the switches at the back to the OFF position, unplug the power cord... -
Page 6: Using The Hot Water Tap
cooling LED indicator turns on and the cooling system starts. When the cold water reaches a temperature of approx. 8ºC / 46ºF, the green light goes off and the cooling system stops working. The machine turns to keeping cool mode. When the cold water temperature rises to 10ºC / 50ºF degree, the cooling system will automatically resumes. -
Page 7: Draining The Dispenser
After about one hour, press the hot & cold buttons until no more water comes out of the taps. IMPORTANT: Before use, dispense at least one quart of water from each tap to make sure the cleaning solution is completely removed. Draining the Dispenser IMPORTANT: Put both power switches to the OFF position and UNPLUG the water dispenser before... -
Page 8: Troubleshooting Tips
TROUBLESHOOTING TIPS Please check the following troubleshooting tips before calling the customer service line or having the machine repaired. Problem Possible Causes Water not hot enough or Dispenser is unplugged cold enough The circuit breaker has been tripped All the water in the water tank has been used Water dispenser does not Empty water bottle... -
Page 9: One-Year Limited Warranty
ONE YEAR LIMITED WARRANTY This WHYNTER water dispenser is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service. Should your WHYNTER water dispenser prove defective within one year from the date of purchase, return the defective part or unit, freight prepaid (within two months of purchase;...
Need help?
Do you have a question about the FX-7SB/W and is the answer not in the manual?
Questions and answers