Download Print this page

Specifications; General Power Tool Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita LS1221 Instruction Manual

Hide thumbs


Table of Contents
ENGLISH (Original instructions)


Blade diameter
Hole diameter
Max. kerf thickness of the saw blade
Max. Miter angle
Max. Bevel angle
No load speed (RPM)
Dimensions (L x W x H)
Net weight
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2014
Max. Cutting capacities (H x W)

General power tool safety warnings

Read all safety warnings, instruc-
tions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Bevel angle
45° (left)
674 mm x 610 mm x 607 mm (26-1/2" x 24" x 23-7/8")
98 mm x 153 mm
(3-7/8" x 6")
63.5 mm x 203 mm
(2-1/2" x 8")
70 mm x 149 mm
(2-3/4" x 5-7/8")
44.5 mm x 200 mm
(1-3/4" x 7-7/8")
Electrical Safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable, use a Residual Current Device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
305 mm (12")
25.4 mm (1")
3.2 mm (1/8")
Left 48° , Right 48°
Left 45°
4,000 /min
17.3 kg (38.2 lbs)
Miter angle
45° (left and right)
98 mm x 107 mm
(3-7/8" x 4-1/4")
63.5 mm x 143 mm
(2-1/2" x 5-5/8")
44.5 mm x 130 mm (*Left)
(1-3/4" x 5-1/8")
44.5 mm x 140 mm (*Right)
(1-3/4" x 5-1/2")


Table of Contents

  Related Manuals for Makita LS1221