Advertisement
Quick Links
Advertisement
Summary of Contents for RoamEO RoamEO RoamEO GPS Pet Location System
- Page 1 Pet Location System...
- Page 3 Welcome Congratulations on your purchase of the RoamEO GPS Pet Location system. Your system should include the following components: RoamEO GPS Receiver RoamEO Collar Power Adapter for Receiver Power Adapter for Collar Owners Manual...
- Page 5 Quick Reference Guide: How do I start using RoamEO? ........7 What are these buttons for on the GPS Receiver? .
- Page 6 Introduction to your RoamEO GPS Pet Location System The RoamEO GPS Pet Location System is made up of two compo- nents: a handheld GPS Receiver and a special GPS-enabled collar for your pet. Both components are required for a functional system. RoamEO GPS Receiver The RoamEO GPS Receiver is designed to display the location and movements of your pet within a one mile radius.
- Page 7 RoamEO Collar The RoamEO Collar uses GPS technology and a miniature radio that sends GPS coordinates to the Receiver where they are displayed on the LCD screen. Each collar has a unique address that is only recog- nized by your Receiver. We have programmed your collar(s) for you, so it is not necessary to re-program them before you use the RoamEO system.
- Page 8 GPS Basics The Global Positioning System (GPS) was launched in 1995 by the United States Defense Department. Twenty-four satellites orbit at 10,900 nautical miles above the Earth, passing overhead twice daily. At least four of these satellites are in view nearly anywhere on the Earth at all times.
- Page 9 Starting Out The RoamEO GPS Pet Location System is designed to be operational without any set-up or third party services. You can begin using RoamEO immediately. To begin using your RoamEO system: Power on the Receiver. 2. Press the Power button on each Collar you would like to place in service.
- Page 10 Screen Views RoamEO is designed with three operational screens to provide information about the location of your pet and the status of the GPS: Basic Tracking Screen RoamEO defaults to the Basic Tracking Screen when powered up. Detailed Tracking Screen Similar to the Basic Tracking Screen, but provides detailed distance and velocity information for each active collar.
- Page 11 Basic Tracking Screen The Basic Tracking Screen displays the location and movements of all active Collars. By using the distance rings, you can estimate your distance from your pet. Refer to the Collar Status Bar to monitor the GPS and Radio status of each Collar. Figure 1 shows a Basic Tracking Screen with two active Collars, one about 100 feet from you, the other about 150 feet.
- Page 12 GPS Status Screen The GPS Status Screen displays the status of the GPS satellites, as well as other critical data associated with their performance. This screen can be helpful to assess the number of satellites your Receiver is using to gain its GPS data and the signal strength of each of these satellites.
- Page 13 Understanding the RoamEO Operation Screens When initially powered on, RoamEO defaults to the Basic Tracking Screen. There are three areas of information on this screen which are all continually updated to provide you with real time data that will help you use your RoamEO system.
- Page 14 GPS Receiver Toolbar The GPS Receiver toolbar provides information on the status of the GPS Receiver. a benchmark location. For example, if Accuracy reads 17 feet, then your current position is estimated to be within 17 feet of your actual latitude and longitude coordinates. The Accuracy number provides an indicator of the quality of your GPS fix: the smaller the number, the greater the GPS accuracy.
- Page 15 GPS Status Green waves indicate a GPS lock. White waves indicate the Receiver is unable to achieve a GPS fix in this location. Remaining battery life of the GPS Receiver. GPS Fence Status Gray indicates the GPS Fence is turned off. White indicates the GPS Fence is on and all active Collars are currently contained within the fence.
- Page 16 Collar Status Bar The status of all active collars is displayed in the Collar Status Bar. Each collar transmits new GPS location data every three seconds, which is then updated on the screen. Check this bar to insure that your Collar is receiving GPS data, and to verify the radio reception of your GPS Receiver.
- Page 17 Tracking Screen Your pet’s location and movements are displayed on the Tracking Screen and are continually updated. Each is color coded to match its corresponding color on the Collar Status Bar. RoamEO can track up to three Collars at one time.
- Page 18 indicates a Collar has gone outside the scale you currently have selected for your Tracking Screen. The location of shows where the Collar left the scale of the screen and the direction it was heading at the time. RoamEO continues to track the Collar and the will move around the perimeter of the screen as it follows the movements.
- Page 19 How to use the Tracking Screens The Tracking Screens are designed to display the movements of your pet in relation to your position. When using the Tracking Screens, here are some things to remember: Your location is always in the center of the screen designated by .
- Page 20 LCD Screen Options Power Saving Mode RoamEO is designed with a Power Saving Mode to improve the battery life of the Receiver. When RoamEO enters the Power Saving Mode, the brightness of the display is lowered to help save power. To restore the screen to its original brightness, press any button and the LCD will return to its original setting.
- Page 21 Charging your GPS Receiver and Collar For all the benefits of GPS, unfortunately it requires a fair amount of power to operate. To maintain communication with the GPS satellite system, the GPS receiver must stay on at all times. As a result, all GPS- based products, including RoamEO, require recharging or replacing batteries more frequently than other electronic products you may own.
- Page 22 Setting up a GPS Fence The GPS Fence can be a valuable feature to assist you in protecting your pet. However, it is not meant to be substitute for human initiative and we do not recommend this as a pet containment system. The GPS Fence feature allows you to establish a perimeter that when combined with the Alarm will give an audible warning if your pet exits your defined boundary.
- Page 23 5. Remember that both the Alarm and the GPS Fence must be activated in order to receive an audible warning if your pet exits your perimeter. You can use your GPS Fence without the Alarm if desired. Example: if you have drawn a perimeter around a known area such as your property line, the GPS Fence can help give you a better perspective of your pet’s location in these immediate surroundings.
- Page 24 Building your GPS Fence To build your GPS Fence, you will need to set GPS fence posts that will be used to outline the perimeter of you desired boundary. After establishing these fence posts, RoamEO will automatically ‘ d raw’ in the fence and store it in memory for future use.
- Page 25 Step 1 Press the and the buttons on the GPS Receiver simultane- ously. This will set the GPS Receiver into the Fence Building mode and the Fence Building screen will be displayed. You are now ready to begin establishing the fence posts. See figure 5. Figure 5 Fence Building Screen Step 2...
- Page 26 Step 3 Walk to your first fence post. Your movements will be displayed on the screen with the . You can also gain an appreciation of your distances from the distance rings shown on your screen. When you reach the desired location for your first fence post, and are satisfied with the accuracy of the GPS at that point, press the button.
- Page 27 Step 4 After establishing the last fence post, press . Your fence will now be saved to memory. The green will indicate that your fence has been successfully completed and placed into memory. See figure 9. To activate your fence, press at any time.
- Page 28 Using your GPS Fence Once you have built your GPS Fence, you may use it at any time. To turn on your GPS Fence, press and the in the GPS Receiver Toolbar will now be illuminated. See figure 10. Status of GPS Fence is displayed on GPS Receiver toolbar. A white fence indicates your GPS Fence is active and all Collars are contained within the fence perimeter.
- Page 29 Using the GPS Fence from inside your home You can use the GPS Fence feature from indoors, as long as the GPS Receiver is making radio contact with a Collar. To use the GPS Fence from indoors, it is recommended placing the GPS Receiver near a window on the side of the house closest to where you expect the Collars to be.
- Page 30 Enrolling Collars to your GPS Receiver In order for RoamEO to operate, the Collar must be set up to be able to ‘talk’ to a Receiver. Each RoamEO Collar contains a unique ID which is used so that it only communicates with the Receiver which has been programmed to recognize that ID.
- Page 31 Step 2 Using the Zoom button to scroll up or down, select the Collar you wish to enroll. If you wish to enroll the Collar that has been automatically selected, proceed to Step 3. Step 3 Press the button on the GPS Receiver. This will select the Collar you have chosen and place it in memory.
- Page 32 FCC Compliance This device complies with Part 15 of the U.S. Federal Communications Commission (FCC) Rules. Operation is subject to the following conditions: This device may not cause harmful interference. 2. This device must accept any interference that may cause undesired operation.
- Page 33 The software contained in this product are protected by copyright owned by White Bear Technologies. You may not modify, adapt, trans- late, reverse engineer, de-compile, disassemble, rent, lease or resell any software or create derivative works based upon any software or its contents.
- Page 34 Warranty White Bear Technologies warranties the RoamEO GPS Pet Location System against defects and malfunctions in materials and workmanship, and against failure to conform to the product’s written specifications for one (1) year from the date of original purchase. We make no other express warranty or representation of any kind whatsoever concerning this product.
- Page 35 How To Obtain Service For all technical, return or repair questions, please contact the Factory by either email or phone. If using email, please provide a detailed description of the problem or question you have. Email: info@whitebeartech.com Phone: 651-636-5695 M-F, 9am-4pm, Central Standard Time Before any product can be returned, you must call customer service to determine if a return is necessary.
- Page 36 RoamEOforPets WWW. .COM WHITE BEAR TECHNOLOGIES, 900 LONG LAKE ROAD, SUITE 110, MINNEAPOLIS, MN 55112 © 2007 WHITE BEAR TECHNOLOGIES OWNERS MANUAL VERSION 1.1 1OWN-01000-11...