Description; Intended Use - Honeywell HON 5020 User And Maintenance Manual

2

Description

Contents
2.1

Intended use

Intended use
Limitations of use
HON 5020 gas pressure regulator with HON 630 pilot
Topic
Intended use
Device models
Labels/Markings
Identifying the device
Layout and operation
Technical specifications
HON 5020 gas pressure regulators featuring an HON 630 pilot can be used to maintain the
outlet pressure of a gas constant within a regulating line regardless of the influence of dis-
turbance variables such as inlet pressure changes and/or discharge changes. These devices
are also characterized by high accuracy even in the event of large inlet pressure changes. It
can be used in transfer stations of gas transportation networks, in power plants and industrial
plants. HON 5020 gas pressure regulators featuring an HON 630 pilot are suitable for use with
natural gas or dry, non-aggressive industrial gases.
Note: The utilization limits of the device with regard to the medium, operating pressure and
operating temperature can be gathered from the type plate attached on the device or the
technical specifications.
The use under different operating conditions must be coordinated in consultation with the
manufacturer.
Please observe the following limitations of use:
 Do not use the device for any media other than those mentioned in the intended use or
those discussed with and approved by the manufacturer.
 Do not use the device in any installation position other than the one documented in
this user manual.
 Do not use the device against the direction of flow specified on the device and in the
user manual.
 When replacing defective parts, only use original spare parts or manufacturer-approved
standard parts.
 Do not attempt to modify or remodel the device on your own.
Description
Page
7
8
9
10
12
16
7