Flush System - Whirlpool WSR413YW0 Use And Care Manual And Installation Instructions

Flush System
Instructions At A Glance
l
For detailed instructions see following page.
I. Slide filtration assembly onto mounting screws.
2. Turn on faucet and drain tank to flush
(Step 5a)
disinfectant from tank. (Step 5b)
3. Turn on cold water supply and
saddle valve. (Step 5c)
4. Allow tank to fill - ap roximately 4 hours. Lift faucet handle
to drain tank. Fill an B drain tank again - another 4 hours.
Wait for tank to fill again. When faucet is turned on, green
indicator light will indicate water is ready for use. (Steps 5d-5e)
12