Dell EqualLogic PS Series Hardware Owner's Manual page 32

PS6610 Hardware Owner's Manual
To reduce the risk of losing or damaging the microSD card, do not remove it until you are
Caution:
ready to install it in the replacement control module.
1. Firmly push the card into its housing to release the spring mechanism (see
microSD card will become partially ejected from the housing.
2. Gently pull the card straight out of the housing.
3. Place the microSD card on a flat surface where it will be protected from electrostatic discharge.
Insert the MicroSD Card
1. Align the replacement microSD card so the arrow on the card points toward the housing
18). When correctly positioned, the gold contacts will be facing downward, and inward toward the
housing.
2. Firmly press the card into the housing until it clicks into place. Confirm that the card is securely
seated by pressing to ensure the release spring mechanism is engaged and ejects the SD card.
Then, reinsert the SD card and ensure it is seated securely by pulling gently on the SD card.
26
Figure 17: Ejecting the MicroSD Card
3 Control Module Maintenance
Figure 17). The
(Figure