Automatic Cycles - Whirlpool Thin Twin LT5000XS Use & Care Manual

3
To Stop and
. Restart the Dryer
To stop, open the door (or turn
the Control Knob to the OFF area).
To restart, close the door and
push the START Button.
4. Changing the Setting
The setting can be changed at any
time by turning the Control Knob
to a new setting.
The Cycle Control Knob should
polnf to an OFF area when the dryer Is
not Is use. If the dryer Is stopped
before the cycle Is finlshed, turn the
Cycle Control Knob to an OFF area.
The automatic cycles
The automatic cycles allow you
to select the degree of dryness you
prefer for the clothes being dried.
The Cycle Control Knob will not
move until the clothes load is
almost dry, or the COOL-DOWN
portion of the cycle has been
reached. After COOL-DOWN, the
knob automatically moves to an
OFF area and tumbling stops.
Use
AUTOMATIC
REGULAR to
dry heavy
and medium-
weight cotton items. The load fumbles
wlfhout heat during the last 5 minutes.
This heIDS make the load easier to
Use
AUTOMATIC
PERMANENT
PRESS to dry
permanent
press, knits and other synthetic fabrics.
The load tumbles wlfhout heat durlng
the last 10 mlnutes. This helps keep
wrinkles from setting in, and makes the
load easier to handle.
14
For the first few loads, set the Control
Knob to point to an * in either auto-
matic cycle. When the dryer stops,
feel the dried items.
l
If Items are drier than you like, use a
setting to the right if the * the next
time you dry a similar load.
l
If items are not as dry as you like,
use a setting to the left of the * the
next time you dry a similar load.