Selecting The Right Cycle And Temperature Setting - Whirlpool 3LER5436EQ0 Use & Care Manual

S
TARTING YOUR DRYER
Stopping and restarting your dryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control
knob to Off.
NOTE: The Cycle Control knob should point to an
Off area when the dryer is not in use.
S
ELECTING THE RIGHT CYCLE AND TEMPERATURE SETTING
The following pages describe the drying cycles
on your dryer. The descriptions include suggested
temperature settings and drying times for various
loads.
Cycle and temperature tips
•
Make sure you have selected the correct cycle
and temperature for your load.
•
Use the Fluff Air cycle, or line dry rubber, plastic,
delicate, and heat-sensitive fabrics.
•
The last few minutes of all cycles are without
heat to make the load cooler to handle.
.
( CONT
)
To restart your dryer:
Close the door, select a new cycle and temperature
(if desired), and push the Start button.
Drying tips
•
Always follow care label directions when they are
available.
•
Always use fabric softener sheets labeled as dryer
safe and follow package instructions carefully.
•
Remove the load from the dryer as soon as
tumbling stops to reduce wrinkling. This is
especially important for permanent press, knits,
and synthetic fabrics.
USING YOUR DRYER
9