Lint Screen; Lint Removal - Whirlpool 3LE5710XM Use & Care Manual

Lint screen
Clean the lint screen before each load.
A screen blocked by lint can
increase drying time and may be a FIRE HAZARD
Open the Ild and pull the lint screen
ROLL
the lint off the icreen
straight out with your fingers
0
DO
NOT
run the dryer with
DO NOT
rinse or wash the screen
the lint screen loose, Push the screen firmly back into
damaged or missing.
place
Doing so can cause over-
heating, can damage fabrics and
can be a
FIRE HAZARD.
Lint removal
Lint can gather Inside the dryer and create a fire hazard
This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
I
Heater Box
\\ /' I
1': Thermostats 1' fh
Heat Element
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
0
l
Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
l
Avoid injury or damage - do not
put hands inside cabinet.
l
Make sure dryer is cool.
1.
Remove back panel
2. Avoid damaging wires or ther-
mostats
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner
4. Replace panel, reconnect and re-
level drver