Table of Contents
Advertisement
C-Series AS-i Master Module
Safety
3.
Safety
3.1
Intended use
Warning!
This symbol warns of a possible danger. The protection of operating personnel and the
system against possible danger is not guaranteed if the control interface unit is not
operated in accordance to its intended use.
Warning!
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired!
3.2
No user-serviceable parts
Warning!
No user serviceable parts inside. Do not open!
3.3
General safety information
Warning!
Safety and correct functioning of the device cannot be guaranteed if any operation
other than described in this operation manual is performed. Connecting the equipment
and conducting any maintenance work under power must exclusively be performed by
appropriately qualified personnel. In case a failure cannot be eliminated, the device
must be taken out of operation and inadvertently operation must be prevented. Repair
work must be performed by the manufacturer only. Additions or modifications to the
equipment are not permitted and will void the warranty.
Information!
The operator is responsible for the observation of local safety standards.
3.4
Safety Guidelines for Hazardous Locations
The BW3023 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4
hazardous locations; Class I, Zone 2, AEx nA IIC T4, and Ex nA IIC T4 hazard-
ous locations; and nonhazardous locations only. Follow these guidelines if you
are installing the BW3023 in a potentially explosive environment. Not following
these guidelines may result in serious injury or death.
Subject to technical modifications; no responsibility is accepted for the accuracy of this information
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim
© Bihl+Wiedemann GmbH
phone: +49 621 33 996-0 • fax: +49 621 3 39 22 399
9
Advertisement
Table of Contents
