Table of Contents
Advertisement
Other Operating Instructions
Rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse
and spin.
1. Push Cycle Control Knob in.
2. Turn clockwise until indicator points
to one of the dots on the dial, as
illustrated.
3. Pull Cycle Control Knob out. The
washer will fill to selected level,
agitate 2-4 minutes depending on
the cycle selected, drain and spin.
Extra rinse option
For an automatic extra rinse in the
REGULAR Cycles:
. Touch the Extra Rinse ON pad before
a REGULAR Cycle starts. The ON
indicator will show. The washer will
automatically
proceed into the extra
rinse and spin after the REGULAR
Cycle.
. If no extra rinse and spin IS wanted in
a REGULAR Cycle, touch the Extra
Rinse OFF pad. Make sure the OFF
Indicator IS showing. If extra rinse is
not selected, the Cycle Control Knob
will stop at the orange line before
EXTRA RINSE OPTION when the
REGULAR Cycle is completed.
For an extra rinse in other cycles, see
"Rinse and spin."
Drain and spin
A drain and spin may help shorten
drying times for some heavy fabrics
or special-care items by removing
excess water.
1. Push Cycle Control Knob in.
2. Turn clockwise until indicator points
to any bar just before an OFF area
on the dial, as illustrated.
3. Pull Cycle Control Knob out. The
washer will drain and spin.
10
Advertisement
Table of Contents
