For Spinning Only; For Rinsing Only - Whirlpool LA7800XK Use & Care Manual

For Spinning Only
There may be times when You
want to drain out all the wash water and
start over. To stop the washer
at
any
time, just push rn on the Cycle Control
Knob.
To set the washer so It drams and
spins water out of the load, push in on
the Control Knob, turn the dial to the
right [clockwise) so the pointer is touch-
ing the bar just before OFF in any cycle.
The washer WI/I drain, spin out
water and stop. If you want a low-speed
spin, use the bar on PERMANENT PRESS
or KNITS GENTLE. All the other cycle
seitrngs have a high-speed sprn.
For Rinsing Only
Loads with towels, diapers, jeans
or heavily soiled items often need extra
detergent. Extra detergent can require
an extra rinse.
Your washer can be set to rinse
only Use the setting for an extra rinse, or
for laundry that only needs a rrnse and
sprn.
There is a dot just after the num-
bers in PERMANENT PRESS, REGULAR
HEAVY and KNITS GENTLE. If you push in
on the Cycle Control Knob, turn the
pornter to one of those dots and pull the
Control Knob out, the washer will fill,
agitate drain and spin.
If you want high agitation and a
high-speed spin, use the dot in REGU-
LAR HEAVY. If you want low agitation
and a low-speed spin, use the dot in
KNITS GENTLE. Use the dot In PERMA-
NENT PRESS if you want high agitation
and a low-speed spin
12